Winfield soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 13 to 33 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Winfield soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Winfield spot on the map
Rated from the USDA soil survey record for Winfield silt loam, 2 to 5 percent slopes (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (22): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 20 in (51 cm)).
- Note Typically starts within about 13 in (33 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 8 in down: about 22% clay, moderate plasticity when wet, brown when moist. Possible
- Loamy layerH2 A silt loam layer about 8 to 13 in down: about 26% clay, moderate plasticity when wet, dark yellowish brown when moist. Weak indication
- Loamy layerH3best layer A silty clay loam layer about 13 to 33 in down: about 31% clay, high plasticity when wet, yellowish brown when moist. Promising
- Loamy layerH4 A silt loam layer about 33 to 60 in down: about 22% clay, moderate plasticity when wet, gray when moist. Possible
What it looks like raw
The loamy layer (H3), 13 to 33 in down in the typical profile: yellowish brown (10YR 5/4); firm. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 6 map units in Illinois, Missouri, in these survey areas: Pike County, Illinois; Pike County, Missouri.
By state: wild clay in Illinois,wild clay in Missouri.
USDA, distribution and extent: MLRAs 107, 112, and 115 in central and eastern Missouri bordering the river valleys of the Missouri and Mississippi Rivers, and in west-central and southwestern Illinois on loess hills along the Mississippi River. The type location is in MLRA 115. The series is of large extent.
USDA, geographic setting: Winfield soils are on ridgetops, sideslopes, summits, shoulders, and backslopes of hills, and on treads of high stream terraces. The soils formed in loess. Slope gradients are dominantly 2 to 20 percent with an extreme range up to 45 percent. Mean annual temperature ranges from 11.1 to 13.9 degrees C (52 to 57 degrees F). Mean annual precipitation ranges from 813 to 1,067 (32 to 42 inches).
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Keswick: Strong lead
- Bremer: Strong lead
- Bucklick: Strong lead
- Carlow: Strong lead
- Chequest: Strong lead
- Crider: Strong lead
- Darwin: Strong lead
- Dupo: Strong lead
See it on the map
Open a Winfield spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Winfield silt loam, 2 to 5 percent slopes, map unit 477B in Pike County, Illinois.
- Official Series Description: Winfield(revised 05/2020), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Oxyaquic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.