Toccoa soil
Wild-clay potential
Weak indication
Weak indication: no layer of Toccoa shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Toccoa soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Toccoa loamy sand (Spotsylvania County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 11% clay.
- Lowers the potential Low engineering plasticity index (2): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 52 in (132 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- Sandy layerH1 A loamy sand layer about 0 to 9 in down: about 6% clay, low plasticity when wet, dark yellowish brown when moist. Weak indication
- Sandy layerH2best layer A sandy loam layer about 9 to 61 in down: about 11% clay, low plasticity when wet, dark yellowish brown when moist. Weak indication
What it looks like raw
The sandy layer (H2), 9 to 61 in down in the typical profile: dark yellowish brown (10YR 4/4); very friable. Raw colour is not fired colour.
About the soil
- Parent material: alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 6 map units in Georgia, Virginia, in these survey areas: Cherokee, Gilmer, and Pickens Counties, Georgia; Cobb County, Georgia; DeKalb County, Georgia; Douglas County, Georgia; Spotsylvania County, Virginia.
By state: wild clay in Georgia,wild clay in Virginia.
USDA, distribution and extent: Distribution: Alabama, Georgia, North Carolina, South Carolina, Tennessee, and Virginia
USDA, geographic setting: Elevation Range: 120 to 460 meters (400 to 1500 feet)
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Madison: Strong lead
- Cecil: Strong lead
- Gwinnett: Strong lead
- Helena: Strong lead
- Hiwassee: Strong lead
- Louisa: Strong lead
- Masada: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Toccoa loamy sand, map unit 41 in Spotsylvania County, Virginia.
- Official Series Description: Toccoa(revised 05/2007), established.
- Taxonomic class: Coarse-loamy, mixed, active, nonacid, thermic Typic Udifluvents
- Rated with rule version 2026-09-28.1; the method is on the About page.