Tice soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 14 to 80 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Tice soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Tice silty clay loam, 0 to 2 percent slopes, occasionally flooded (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (22): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 66 in (167 cm)).
- Note Typically starts within about 14 in (36 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silty clay loam layer about 0 to 14 in down: about 31% clay, high plasticity when wet, very dark grayish brown when moist. Promising
- Loamy layerH2best layer A silty clay loam layer about 14 to 80 in down: about 31% clay, high plasticity when wet, dark grayish brown when moist. Promising
What it looks like raw
The loamy layer (H2), 14 to 80 in down in the typical profile: dark grayish brown (2.5Y 4/2); firm. Raw colour is not fired colour.
About the soil
- Parent material: silty alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Illinois, Missouri, in these survey areas: Calhoun County, Illinois; Pike County, Illinois; Pike County, Missouri.
By state: wild clay in Illinois,wild clay in Missouri.
USDA, distribution and extent: Central, northwestern, and southern Illinois. Tice soils are moderately extensive in MLRAs 108, 114, and 115, with more than 36,000 acres correlated.
USDA, geographic setting: Tice soils are on broad rises on flood plains. Slope gradients range from 0 to 4 percent. Tice soils formed in silty alluvium, and are stratified with medium textured sediments in the BC and C horizons. Mean annual temperature varies from 46 to 57 degrees F, mean annual precipitation varies from 30 to 45 inches, frost free period ranges from 155 to 200 days, and elevation ranges from 340 feet to 1020 feet above sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Keswick: Strong lead
- Bremer: Strong lead
- Bucklick: Strong lead
- Carlow: Strong lead
- Chequest: Strong lead
- Crider: Strong lead
- Darwin: Strong lead
- Dupo: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 92%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Tice silty clay loam, 0 to 2 percent slopes, occasionally flooded, map unit 8284A in Pike County, Illinois.
- Official Series Description: Tice(revised 02/2011), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Fluvaquentic Hapludolls
- Rated with rule version 2026-09-28.1; the method is on the About page.