Sycoline soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 8 to 17 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Sycoline soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Sycoline spot on the map
Rated from the USDA soil survey record for Sycoline-Kelly complex, 2 to 7 percent slopes (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 27% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (16).
- Raises the potential The official series description calls the wet soil moderately sticky (a field observation, not a ceramic test).
- Note Moderate thickness (about 9 in (23 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Note Few rock fragments (about 9% by volume).
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 8 in down: about 21% clay, moderate plasticity when wet, brown when moist. Possible
- Loamy layerH2best layer A silty clay loam layer about 8 to 17 in down: about 27% clay, moderate plasticity when wet, yellowish brown when moist. Promising
- Loamy layerH3 A silt loam layer about 17 to 28 in down: about 21% clay, moderate plasticity when wet, light gray when moist. Possible
- BedrockH4 Bedrock about 28 to 38 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (H2), 8 to 17 in down in the typical profile: yellowish brown (10YR 5/6); friable; sticky. Raw colour is not fired colour.
About the soil
- Parent material: Triassic residuum.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
- Lithic bedrock typically about 28 in (71 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Virginia, in these survey areas: Fauquier County, Virginia; Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Culpeper Basin in Virginia and Maryland, possibly the southern part of the Gettysburg Basin in Maryland and Pennsylvania. The series is of moderate extent.
USDA, geographic setting: Sycoline soils are on upland sideslopes in the Culpeper Basin of the northern part of the Piedmont. Slope ranges from 2 to 25 percent. The soils developed from hornfel and granulite. Mean annual temperature ranges from 53 to 57 degrees F and mean annual precipitation ranges from 38 to 44 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Albano: Strong lead
- Appling: Strong lead
- Cecil: Strong lead
- Jackland: Strong lead
- Worsham: Strong lead
- Aden: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
See it on the map
Open a Sycoline spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 50%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Sycoline-Kelly complex, 2 to 7 percent slopes, map unit 53B in Prince William County, Virginia.
- Official Series Description: Sycoline(revised 01/2006), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Aquultic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.