Pimer soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 15 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Pimer soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Pimer clay loam (Eastern Maricopa and Northern Pinal Counties Area, Arizona) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil slightly sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 45 in (114 cm)).
- Note Typically starts within about 15 in (38 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 13% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilAp A clay loam layer about 0 to 15 in down: about 33% clay, high plasticity when wet, grayish brown when moist. Promising
- Loamy layerCbest layer A stratified loam to clay loam layer about 15 to 60 in down: about 30% clay, high plasticity when wet, grayish brown when moist. Promising
What it looks like raw
The loamy layer (C), 15 to 60 in down in the typical profile: grayish brown (10YR 5/2), very dark grayish brown (10YR 3/2) moist; slightly hard, friable, slightly sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Arizona, in these survey areas: Eastern Maricopa and Northern Pinal Counties Area, Arizona.
By state: wild clay in Arizona.
USDA, distribution and extent: Southern and southwestern Arizona. Pimer soils are of moderate extent. MLRA 40.
USDA, geographic setting: Pimer soils are on alluvial fans and flood plains. Slopes are 0 to 1 percent. These soils formed in recent alluvium from granite, schist, rhyolite, quartzite, shale, limestone, andesite, and basalt. Elevations range from 70 to 2,200 feet. Pimer soils are in a hot arid, continental climate. The average annual precipitation is 3 to 10 inches; mean annual temperature is 67 to 75 degrees F. The frost-free period is 240 to 350 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Avondale: Strong lead
- Contine: Strong lead
- Estrella: Promising
- Mohall: Promising
- Laveen: Possible
- Antho: Weak indication
- Gilman: Weak indication
- Pinal: Weak indication
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Pimer clay loam, map unit Pm in Eastern Maricopa and Northern Pinal Counties Area, Arizona.
- Official Series Description: Pimer(revised 01/2007), established.
- Taxonomic class: Fine-silty, mixed, superactive, calcareous, hyperthermic Typic Torrifluvents
- Rated with rule version 2026-09-28.1; the method is on the About page.