Antho soil
Wild-clay potential
Weak indication
Weak indication: no layer of Antho shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Antho soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Antho sandy loams (Aguila-Carefree Area, Arizona, Parts of Maricopa and Pinal Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 10% clay.
- Lowers the potential Low engineering plasticity index (2.5): little plastic behavior expected when wet.
- Lowers the potential The official series description calls the wet soil nonsticky and nonplastic.
- Note Thick enough to investigate (about 57 in (144 cm)).
- Note Typically starts within about 3 in (8 cm) of the surface.
- Note Few rock fragments (about 2% by volume).
- Note USDA reports about 8% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilA A sandy loam layer about 0 to 3 in down: about 10% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layerCbest layer A sandy loam layer about 3 to 60 in down: about 10% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
What it looks like raw
The sandy layer (C), 3 to 60 in down in the typical profile: light yellowish brown (10YR 6/4), brown (10YR 4/3) moist; slightly hard, very friable, nonsticky and nonplastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: somewhat excessively drained.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Arizona, in these survey areas: Aguila-Carefree Area, Arizona, Parts of Maricopa and Pinal Counties; Eastern Maricopa and Northern Pinal Counties Area, Arizona.
By state: wild clay in Arizona.
USDA, distribution and extent: Southern Arizona. The Antho series is extensive. MLRA is 31 and 40.
USDA, geographic setting: Antho soils are on alluvial fans and flood plains. Elevations range from 100 to 3000 feet. Slopes range from 0 to 5 percent. These soils formed in moderately coarse textured alluvium that includes volcanic, granitic, metamorphic and sedimentary rock. The climate is hot arid continental. The mean annual precipitation is 2 to 10 inches, occurring as summer thunderstorms and gentle winter rain. The mean annual air temperature is 72 degrees F. Frost-free period is 250 to 325 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Contine: Strong lead
- Avondale: Strong lead
- Carefree: Strong lead
- Lehmans: Strong lead
- Ohaco: Strong lead
- Estrella: Promising
- Mohall: Promising
- Glenbar: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 55%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Antho sandy loams, map unit 1 in Aguila-Carefree Area, Arizona, Parts of Maricopa and Pinal Counties.
- Official Series Description: Antho(revised 05/2006), established.
- Taxonomic class: Coarse-loamy, mixed, superactive, calcareous, hyperthermic Typic Torrifluvents
- Rated with rule version 2026-09-28.1; the method is on the About page.