Glenbar soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 6 to 48 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Glenbar soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Glenbar spot on the map
Rated from the USDA soil survey record for Glenbar loams (Aguila-Carefree Area, Arizona, Parts of Maricopa and Pinal Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17.5).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 42 in (107 cm)).
- Note Typically starts within about 6 in (15 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 28% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilA A loam layer about 0 to 6 in down: about 24% clay, low plasticity when wet, brown when moist. Weak indication
- Loamy layerCbest layer A clay loam layer about 6 to 48 in down: about 30% clay, moderate plasticity when wet, pale brown when moist. Promising
- Clay subsoil2Btkb A gravelly sandy clay loam layer about 48 to 60 in down: about 25% clay, moderate plasticity when wet, pale brown when moist. Weak indication
What it looks like raw
The loamy layer (C), 6 to 48 in down in the typical profile: pale brown (10YR 6/3), brown (10YR 4/3) moist; hard, friable, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Arizona, in these survey areas: Aguila-Carefree Area, Arizona, Parts of Maricopa and Pinal Counties.
By state: wild clay in Arizona.
USDA, distribution and extent: Arizona. Glenbar soils are extensive. Total extent is about 327,000 acres. MLRA is 40.
USDA, geographic setting: The Glenbar soils are on flood plains and alluvial fans and have slopes of 0 to 3 percent. They formed in stratified stream alluvium from mixed sources. Elevations range from 230 feet below sea level to 2500 feet above sea level. Mean annual precipitation is 2 to 10 inches. Precipitation falls as summer thunderstorms and gentle winter rains. The mean annual air temperature is 70 to 75 degrees F. Frost-free period is about 240 to 325 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Carefree: Strong lead
- Contine: Strong lead
- Lehmans: Strong lead
- Ohaco: Strong lead
- Estrella: Promising
- Mohall: Promising
- Eba: Possible
- Ebon: Possible
See it on the map
Open a Glenbar spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 41%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Glenbar loams, map unit 60 in Aguila-Carefree Area, Arizona, Parts of Maricopa and Pinal Counties.
- Official Series Description: Glenbar(revised 04/2009), established.
- Taxonomic class: Fine-silty, mixed, superactive, calcareous, hyperthermic Typic Torrifluvents
- Rated with rule version 2026-09-28.1; the method is on the About page.