Avondale soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 0 to 13 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Avondale soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Avondale spot on the map
Rated from the USDA soil survey record for Avondale clay loam (Eastern Maricopa and Northern Pinal Counties Area, Arizona) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 35% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (22.5): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 13 in (33 cm)).
- Note Typically starts within about 0 in (0 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note Surface layer; expect roots and organic matter.
- Note USDA reports about 13% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Clay-rich layerApbest layer A clay loam layer about 0 to 13 in down: about 35% clay, high plasticity when wet, brown when moist. Strong lead
- Loamy layerC1 A loam layer about 13 to 35 in down: about 24% clay, moderate plasticity when wet, pale brown when moist. Possible
- Loamy layerC2 A very fine sandy loam layer about 35 to 60 in down: about 19% clay, moderate plasticity when wet, pale brown when moist. Possible
What it looks like raw
The clay-rich layer (Ap), 0 to 13 in down in the typical profile: brown (10YR 5/3), dark brown (10YR 3/3) moist; slightly hard, friable, sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Arizona, in these survey areas: Eastern Maricopa and Northern Pinal Counties Area, Arizona.
By state: wild clay in Arizona.
USDA, distribution and extent: Southern Arizona, mainly in the central valley area. The Avondale soils are moderately extensive. MLRA 40.
USDA, geographic setting: Avondale soils are on nearly level flood plains and alluvial fans. Elevation ranges from 400 to 2500 feet. They formed in medium and moderately fine textured alluvium derived from mixed basic and acid igneous rocks, quartzite and limestone. Avondale soils are in an arid or semiarid continental climate. Average annual precipitation ranges from 3 to 10 inches and falls mainly during the summer and winter. The soil receives additional moisture during summer in runoff from adjacent soils. Mean annual temperature ranges from about 71 to 75 degrees F.; and the frost-free period is from 250 to 350 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Contine: Strong lead
- Estrella: Promising
- Mohall: Promising
- Pimer: Promising
- Laveen: Possible
- Antho: Weak indication
- Gilman: Weak indication
- Pinal: Weak indication
See it on the map
Open a Avondale spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Avondale clay loam, map unit Av in Eastern Maricopa and Northern Pinal Counties Area, Arizona.
- Official Series Description: Avondale(revised 05/2006), established.
- Taxonomic class: Fine-loamy, mixed, superactive, calcareous, hyperthermic Typic Torrifluvents
- Rated with rule version 2026-09-28.1; the method is on the About page.