Omni soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 17 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Omni soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Omni clay, drained (Orange County and Part of Riverside County, California) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 50% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (36): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 43 in (109 cm)).
- Note Typically starts within about 17 in (43 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note High shrink-swell (linear extensibility about 7.5%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- Clay-rich layerH1 A clay layer about 0 to 17 in down: about 50% clay, high plasticity when wet, gray when moist. Strong lead
- Clay-rich layerH2best layer A silty clay layer about 17 to 60 in down: about 50% clay, high plasticity when wet, mottled very dark gray when moist. Strong lead
What it looks like raw
The clay-rich layer (H2), 17 to 60 in down in the typical profile. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium.
- USDA family particle-size class: fine.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in California, in these survey areas: Orange County and Part of Riverside County, California.
By state: wild clay in California.
USDA, distribution and extent: The soils are in basin areas in the lower Sacramento Valley in central California. The series is inextensive.
USDA, geographic setting: Omni soils are in nearly level concave basin areas at elevations of 5 to 150 feet. The sediments are of mixed origin. The climate is dry subhumid, mesothermal with hot dry summers and cool moist winters. Mean annual rainfall is 17 to 18 inches. Mean annual temperature is 58 degrees F., average January temperature about 42 degrees F., and average July temperature about 75 degrees F. Frostfree season averages about 265 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alo: Strong lead
- Bosanko: Strong lead
- Cropley: Strong lead
- Myford: Strong lead
- Rincon: Strong lead
- Zaca: Strong lead
- Balcom: Promising
- Blasingame: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Omni clay, drained, map unit 184 in Orange County and Part of Riverside County, California.
- Official Series Description: Omni(revised 01/2023), established.
- Taxonomic class: fine, smectitic, calcareous, thermic Fluvaquentic Endoaquolls
- Rated with rule version 2026-09-28.1; the method is on the About page.