Balcom soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 0 to 34 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Balcom soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Balcom clay loam, 9 to 15 percent slopes (Orange County and Part of Riverside County, California) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (22): USDA's estimate suggests plastic behavior when wet.
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 34 in (86 cm)).
- Note Typically starts within about 0 in (0 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1best layer A clay loam layer about 0 to 34 in down: about 31% clay, high plasticity when wet, light brownish gray when moist. Promising
- BedrockH2 Weathered bedrock about 34 to 59 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (H1), 0 to 34 in down in the typical profile: light brownish gray (2.5Y 6/2), dark grayish brown (2.5Y 4/2) moist; hard, firm, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: calcareous residuum weathered from sandstone and shale.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 34 in (86 cm) down.
Where it is mapped
Seen on the map as the most common soil in 4 map units in California, in these survey areas: Los Angeles County, California, Southeastern Part; Orange County and Part of Riverside County, California.
By state: wild clay in California.
USDA, distribution and extent: Coast range mountains in south-central California and on the west side of Sacramento Valley. MLRAs 15 and 20. The series is moderately extensive.
USDA, geographic setting: Balcom soils are on rounded hills at elevations of 200 to 2,300 feet. Slopes range from 5 to 75 percent. The soils formed in material weathered from gray, soft, calcareous shale and sandstone. The climate is dry subhumid mesothermal with warm dry summers and cool moist winters. Mean annual precipitation is 10 to 22 inches. Average January temperature is 53 degrees F., average July temperature is 68 degrees F., and mean annual temperature is 58 degrees to 63 degrees F. The freeze-free season is 175 to 350 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cropley: Strong lead
- Myford: Strong lead
- Zaca: Strong lead
- Alo: Strong lead
- Bosanko: Strong lead
- Omni: Strong lead
- Rincon: Strong lead
- Blasingame: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Balcom clay loam, 9 to 15 percent slopes, map unit 111 in Orange County and Part of Riverside County, California.
- Official Series Description: Balcom(revised 06/2001), established.
- Taxonomic class: Fine-loamy, mixed, superactive, thermic Typic Calcixerepts
- Rated with rule version 2026-09-28.1; the method is on the About page.