Nestucca soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 16 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Nestucca soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Nestucca spot on the map
Rated from the USDA soil survey record for Nestucca silt loam, 0 to 3 percent slopes (Clatsop County, Oregon) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17.5).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 44 in (111 cm)).
- Note Typically starts within about 16 in (41 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 16 in down: about 23% clay, low plasticity when wet, very dark grayish brown when moist. Weak indication
- Loamy layerH2best layer A silty clay loam layer about 16 to 60 in down: about 30% clay, moderate plasticity when wet, dark grayish brown when moist. Promising
What it looks like raw
The loamy layer (H2), 16 to 60 in down in the typical profile: dark grayish brown (10YR 4/2), light brownish gray (10YR 6/2) dry; slightly hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: recent, mixed alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Clatsop County, Oregon.
By state: wild clay in Oregon.
USDA, distribution and extent: Coastal river valleys in western Oregon; MLRA 1. The series is moderately extensive.
USDA, geographic setting: Nestucca soils are on flood plains. Slopes are 0 to 3 percent. Elevations range from 10 to 750 feet. The soils formed in mixed recent alluvial. The soils are characterized by cool wet winters and cool moist summers with fog. The average annual precipitation is 60 to 100 inches. The average January temperature is 42 degrees F., the average July temperature is 60 degrees F., the average annual temperature is 48 to 53 degrees F. The frost-free season is 160 to 300 days. This soil is on the Ingram geomorphic surface.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Brenner: Strong lead
- Chitwood: Strong lead
- Grindbrook: Strong lead
- Hebo: Strong lead
- Coquille: Promising
- Ecola: Promising
- Knappa: Promising
- Templeton: Promising
See it on the map
Open a Nestucca spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Nestucca silt loam, 0 to 3 percent slopes, map unit 52A in Clatsop County, Oregon.
- Official Series Description: Nestucca(revised 08/2001), established.
- Taxonomic class: Fine-silty, mixed, superactive, acid, isomesic Fluvaquentic Humaquepts
- Rated with rule version 2026-09-28.1; the method is on the About page.