Ecola soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 10 to 39 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Ecola soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Ecola silt loam, 3 to 30 percent slopes (Clatsop County, Oregon) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 29% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (15).
- Note Thick enough to investigate (about 29 in (73 cm)).
- Note Typically starts within about 10 in (26 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Organic top layerOi An organic top layer about 0 to 3 in down, not a clay body. Weak indication
- Loamy layerH1 A silt loam layer about 3 to 10 in down: about 22% clay, moderate plasticity when wet, very dark grayish brown when moist. Possible
- Loamy layerH2best layer A silty clay loam layer about 10 to 39 in down: about 29% clay, moderate plasticity when wet, dark yellowish brown when moist. Promising
- BedrockH3 Weathered bedrock about 39 to 50 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (H2), 10 to 39 in down in the typical profile: dark yellowish brown (10YR 4/4), yellowish brown (10YR 5/4) dry. Raw colour is not fired colour.
About the soil
- Parent material: colluvium derived from sedimentary rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
- Paralithic bedrock typically about 39 in (99 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Oregon, in these survey areas: Clatsop County, Oregon.
By state: wild clay in Oregon.
USDA, distribution and extent: Northwest Oregon; MLRA 4A. The soil is inextensive.
USDA, geographic setting: Ecola soils are on ridgetops and side slopes of hills and mountains in the Coast Range. Elevation is 50 to 1,800 feet. Slopes are 0 to 90 percent. The soils formed in colluvium weathered from sedimentary bedrock. The climate is cool and wet during the winter. The mean annual precipitation of 60 to 110 inches. Many summer days have fog or low cloud cover during the mornings. The mean January temperature is 38 degrees F., and average July temperature is 59 degrees F. The mean annual temperature is 46 to 53 degrees F. The frost-free period is 100 to 245 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Brenner: Strong lead
- Chitwood: Strong lead
- Grindbrook: Strong lead
- Hebo: Strong lead
- Coquille: Promising
- Knappa: Promising
- Nestucca: Promising
- Templeton: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Ecola silt loam, 3 to 30 percent slopes, map unit 16D in Clatsop County, Oregon.
- Official Series Description: Ecola(revised 06/2011), established.
- Taxonomic class: Fine-silty, isotic, isomesic Andic Humudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.