Nehalem soil
Wild-clay potential
Weak indication
Weak indication: no layer of Nehalem shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Nehalem soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Nehalem spot on the map
Rated from the USDA soil survey record for Nehalem silt loam, 0 to 3 percent slopes (Clatsop County, Oregon) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 22% clay. It may need settling or refining to become a clay body.
- Lowers the potential Low engineering plasticity index (5): little plastic behavior expected when wet.
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 32 in (81 cm)).
- Note Typically starts within about 16 in (41 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilAp A silt loam layer about 0 to 9 in down: about 25% clay, low plasticity when wet, very dark grayish brown when moist. Weak indication
- TopsoilA A silt loam layer about 9 to 16 in down: about 22% clay, low plasticity when wet, dark brown when moist. Weak indication
- Loamy layerBwbest layer A silt loam layer about 16 to 48 in down: about 22% clay, low plasticity when wet, brown when moist. Weak indication
- Loamy layerBC A silt loam layer about 48 to 60 in down: about 25% clay, low plasticity when wet, dark brown when moist. Weak indication
What it looks like raw
The loamy layer (Bw), 16 to 48 in down in the typical profile: brown (10YR 4/3), pale brown (10YR 6/3) dry; slightly hard, friable, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium derived from igneous and sedimentary rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Clatsop County, Oregon.
By state: wild clay in Oregon.
USDA, distribution and extent: Flood plains of coastal river valleys in Western Oregon and Washington; MLRA 4A. The soil is of moderate extent.
USDA, geographic setting: Nehalem soils are on flood plains at elevations of 10 to 750 feet. Slopes are 0 to 3 percent. The soils formed in medium and moderately fine textured mixed alluvial materials. The climate is humid, characterized by cool, wet winters and cool, moist summers with fog. The mean annual temperature is 48 to 53 degrees F. The mean annual precipitation is 60 to 100 inches. The frost-free period is 160 to 300 days. Nehalem soils occur on the Ingram geomorphic surface.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Brenner: Strong lead
- Chitwood: Strong lead
- Grindbrook: Strong lead
- Hebo: Strong lead
- Coquille: Promising
- Ecola: Promising
- Knappa: Promising
- Nestucca: Promising
See it on the map
Open a Nehalem spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Nehalem silt loam, 0 to 3 percent slopes, map unit 51A in Clatsop County, Oregon.
- Official Series Description: Nehalem(revised 06/2011), established.
- Taxonomic class: Fine-silty, mixed, superactive, isomesic Fluventic Humudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.