Minnith soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 5 to 35 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Minnith soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Minnith spot on the map
Rated from the USDA soil survey record for Minnith silt loam, 5 to 9 percent slopes, eroded (Pike County, Missouri) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Bt1" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 30 in (76 cm)).
- Note Typically starts within about 5 in (13 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 5 in down: about 17% clay, moderate plasticity when wet, dark brown when moist. Weak indication
- Clay subsoilBt1best layer A silty clay loam layer about 5 to 35 in down: about 28% clay, high plasticity when wet, dark yellowish brown when moist. Promising
- Clay subsoil2Bt2 A loam layer about 35 to 80 in down: about 13% clay, moderate plasticity when wet, dark yellowish brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt1), 5 to 35 in down in the typical profile: dark yellowish brown (10YR 4/4); silty clay loam; firm. Raw colour is not fired colour.
About the soil
- Parent material: loess over residuum weathered from sandstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Missouri, in these survey areas: Pike County, Missouri.
By state: wild clay in Missouri.
USDA, distribution and extent: The River Hills area (MLRA 115) and the Ozark Border area (MLRA 116B) of east central and southeast Missouri. The series is of moderate extent.
USDA, geographic setting: The Minnith soils are associated with the underlying sandstone formation in rather narrow bands, in some places displaced by faulting, and on side slope and ridgetop positions. Slope gradient ranges from 2 to 14 percent. The soils formed in 24 to 40 inches of loess and the underlying loamy residuum weathered from sandstone. The mean annual temperature ranges from 54 to 57 degrees F, and the mean annual precipitation ranges from 40 to 45 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Bremer: Strong lead
- Bucklick: Strong lead
- Carlow: Strong lead
- Chequest: Strong lead
- Crider: Strong lead
- Dupo: Strong lead
- Gorin: Strong lead
- Keswick: Strong lead
See it on the map
Open a Minnith spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Minnith silt loam, 5 to 9 percent slopes, eroded, map unit 60193 in Pike County, Missouri.
- Official Series Description: Minnith(revised 06/2008), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Oxyaquic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.