Gorin soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 12 to 27 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Gorin soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Gorin silt loam, 2 to 5 percent slopes (Pike County, Missouri) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 47% clay in the fine-earth portion.
- Note USDA labels this a "Bt1" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (34): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 15 in (39 cm)).
- Note Typically starts within about 12 in (30 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- TopsoilA A silt loam layer about 0 to 12 in down: about 16% clay, moderate plasticity when wet, very dark gray when moist. Weak indication
- Clay subsoilBt1best layer A silty clay layer about 12 to 27 in down: about 47% clay, high plasticity when wet, dark brown when moist. Strong lead
- Clay subsoil2Bt2 A loam layer about 27 to 48 in down: about 24% clay, moderate plasticity when wet, dark brown when moist. Possible
- Clay subsoil3Bt3 A clay layer about 48 to 80 in down: about 44% clay, high plasticity when wet, dark brown when moist. Promising
What it looks like raw
The clay subsoil (Bt1), 12 to 27 in down in the typical profile: dark brown (10YR 4/3); silty clay loam; firm. Raw colour is not fired colour.
About the soil
- Parent material: loess over pedisediment over till.
- USDA family mineralogy: smectitic. Smectite-rich clays are usually very plastic and shrink a lot as they dry.
- USDA family particle-size class: fine.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Missouri, in these survey areas: Pike County, Missouri.
By state: wild clay in Missouri.
USDA, distribution and extent: Northeast Missouri and possibly southeast Iowa. The series is of moderate extent.
USDA, geographic setting: Gorin soils are on narrow ridgetops. Slopes range from 2 to 14 percent. The soils formed in 30 to 50 inches of loess and in the underlying loamy sediments or loess, loamy sediments and a paleosol from glacial till. The mean annual temperature ranges from 50 to 55 degrees F, and mean annual precipitation ranges from 32 to 40 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Bremer: Strong lead
- Bucklick: Strong lead
- Carlow: Strong lead
- Chequest: Strong lead
- Crider: Strong lead
- Dupo: Strong lead
- Keswick: Strong lead
- Okaw: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 97%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Gorin silt loam, 2 to 5 percent slopes, map unit 30066 in Pike County, Missouri.
- Official Series Description: Gorin, established.
- Taxonomic class: Fine, smectitic, mesic Aquertic Chromic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.