Lunt soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 7 to 39 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Lunt soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Lunt loam, 2 to 7 percent slopes (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 48% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (35): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 32 in (81 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 5% by volume).
- Note High shrink-swell (linear extensibility about 7.5%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- Loamy layerH1 A loam layer about 0 to 7 in down: about 19% clay, moderate plasticity when wet, brown to dark brown when moist. Possible
- Clay-rich layerH2best layer A clay layer about 7 to 39 in down: about 48% clay, high plasticity when wet, strong brown when moist. Strong lead
- Sandy layerH3 A sandy loam layer about 39 to 72 in down: about 18% clay, moderate plasticity when wet, very pale brown when moist. Weak indication
What it looks like raw
The clay-rich layer (H2), 7 to 39 in down in the typical profile: strong brown (7.5YR 5/6); firm, plastic, very sticky. Raw colour is not fired colour.
About the soil
- Parent material: marine deposits.
- USDA family mineralogy: smectitic. Smectite-rich clays are usually very plastic and shrink a lot as they dry.
- USDA family particle-size class: fine.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Virginia, in these survey areas: Alexandria City, Virginia; Fairfax County, Virginia; Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Northern Virginia; possibly Maryland. The series is of small extent.
USDA, geographic setting: Lunt soils are gently sloping to moderately steep on Coastal Plain uplands. Slopes range from 2 to 25 percent. They formed in fluviomarine Coastal Plain sediments. Mean annual temperature ranges from 50 to 56 degrees F and the mean annual precipitation ranges from 38 to 44 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Sumerduck: Strong lead
- Aden: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
- Calverton: Strong lead
- Caroline: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Lunt loam, 2 to 7 percent slopes, map unit 34B in Prince William County, Virginia.
- Official Series Description: Lunt(revised 03/2022), established.
- Taxonomic class: Fine, smectitic, mesic Typic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.