Larkin soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 23 to 64 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Larkin soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Larkin silt loam, 3 to 12 percent slopes (Latah County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 27% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Btc" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (18).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 41 in (104 cm)).
- Note Typically starts within about 23 in (58 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Organic top layerOi An organic top layer about 0 to 1 in down, not a clay body. Weak indication
- Organic top layerOe An organic top layer about 1 to 2 in down, not a clay body. Weak indication
- TopsoilA A silt loam layer about 2 to 23 in down: about 20% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- Clay subsoilBtcbest layer A silt loam layer about 23 to 64 in down: about 27% clay, moderate plasticity when wet, yellowish brown when moist. Possible
What it looks like raw
The clay subsoil (Btc), 23 to 64 in down in the typical profile: yellowish brown (10YR 5/4) dry, dark yellowish brown (10YR 4/4) moist; very hard, very firm, sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: loess.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Idaho, in these survey areas: Latah County, Idaho; Lewis and Nez Perce Counties, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Northern Idaho and eastern Washington; MLRA 9; moderate extent
USDA, geographic setting: Elevation--365 to 1125 m in Idaho; as high as 1375 m in Washington
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cramont: Strong lead
- Driscoll: Strong lead
- Garfield: Strong lead
- Latah: Strong lead
- Taney: Strong lead
- Tilma: Strong lead
- Latahco: Promising
- Naff: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Larkin silt loam, 3 to 12 percent slopes, map unit 23 in Latah County, Idaho.
- Official Series Description: Larkin(revised 06/2016), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Ultic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.