Haymond soil
Wild-clay potential
Weak indication
Weak indication: no layer of Haymond shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Haymond soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Haymond spot on the map
Rated from the USDA soil survey record for Haymond silt loam, 0 to 2 percent slopes, frequently flooded (Pike County, Illinois) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 15% clay.
- Note Moderate engineering plasticity index (9).
- Note Thick enough to investigate (about 60 in (153 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A silt loam layer about 0 to 8 in down: about 16% clay, moderate plasticity when wet, brown when moist. Weak indication
- Sandy layerH2best layer A silt loam layer about 8 to 68 in down: about 15% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Sandy layerH3 A silt loam layer about 68 to 80 in down: about 16% clay, moderate plasticity when wet. Weak indication
What it looks like raw
The sandy layer (H2), 8 to 68 in down in the typical profile: yellowish brown (10YR 5/4); friable. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Illinois, Missouri, in these survey areas: Pike County, Illinois; Pike County, Missouri.
By state: wild clay in Illinois,wild clay in Missouri.
USDA, distribution and extent: Southern Indiana, western Kentucky, Illinois, eastern Missouri, and south central Ohio. The series is of large extent, and is within several MLRA's. The Type Location is in MLRA 115A.
USDA, geographic setting: Haymond soils are on nearly level flood plains and flood-plain steps. They formed in silty alluvium washed dominantly from loess covered hills and till plains. Mean annual temperature ranges from 10 to 14 degrees C (50 to 57 degrees F), and mean annual precipitation ranges from 889 to 1168 mm (35 to 46 inches). Frost free period ranges from 150 to 210 days, and elevation ranges from elevation ranges from 98 to 137 meters (320 to 450 feet).
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Keswick: Strong lead
- Bremer: Strong lead
- Bucklick: Strong lead
- Carlow: Strong lead
- Chequest: Strong lead
- Crider: Strong lead
- Darwin: Strong lead
- Dupo: Strong lead
See it on the map
Open a Haymond spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Haymond silt loam, 0 to 2 percent slopes, frequently flooded, map unit 3331A in Pike County, Illinois.
- Official Series Description: Haymond(revised 01/2011), established.
- Taxonomic class: Coarse-silty, mixed, superactive, mesic Dystric Fluventic Eutrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.