Dekalb soil
Wild-clay potential
Weak indication
Weak indication: no layer of Dekalb shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Dekalb soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Dekalb stony fine sandy loam, 25 to 60 percent slopes (Cherokee, Gilmer, and Pickens Counties, Georgia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- Sandy layerH1 A gravelly loam layer about 0 to 8 in down: about 17% clay, low plasticity when wet, pale brown when moist. Weak indication
- Loamy layerH2 A gravelly silt loam layer about 8 to 27 in down: about 23% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Loamy layerH3 A gravelly loam layer about 27 to 33 in down: about 26% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- BedrockCrbest layer Weathered bedrock about 33 to 60 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (Cr), 33 to 60 in down in the typical profile: yellowish brown (10YR 5/4); loose, nonsticky, nonplastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from quartzite and/or residuum weathered from metasedimentary rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 50 in (127 cm) down.
Where it is mapped
Seen on the map as the most common soil in 13 map units in Georgia, Pennsylvania, in these survey areas: Carbon County, Pennsylvania; Cherokee, Gilmer, and Pickens Counties, Georgia; Schuylkill County, Pennsylvania.
By state: wild clay in Georgia,wild clay in Pennsylvania.
USDA, distribution and extent: Southern New York, Pennsylvania, Maryland, Ohio, West Virginia, Virginia, Kentucky, Tennessee, and Georgia. The series is of large extent.
USDA, geographic setting: Dekalb soils are on nearly level to very steep, uplands and ridges. Slopes are usually convex with gradients of 0 to 80 percent. The regolith weathered from gray and brown acid sandstone in places interbedded with shale and graywacke. The climate is humid temperate with mean annual rainfall of 36 to 60 inches and mean annual air temperature of 47 to 59 degrees F. The growing season ranges from 110 to 180 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Gwinnett: Strong lead
- Hayesville: Strong lead
- Helena: Strong lead
- Hiwassee: Strong lead
- Madison: Strong lead
- Masada: Strong lead
- Worsham: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Dekalb stony fine sandy loam, 25 to 60 percent slopes, map unit DuF in Cherokee, Gilmer, and Pickens Counties, Georgia.
- Official Series Description: Dekalb(revised 05/2004), established.
- Taxonomic class: Loamy-skeletal, siliceous, active, mesic Typic Dystrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.