Wickham soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 8 to 42 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Wickham soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Wickham spot on the map
Rated from the USDA soil survey record for Wickham fine sandy loam, 2 to 8 percent slopes (Davidson County, North Carolina) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 27% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (11).
- Note Thick enough to investigate (about 34 in (87 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Note Few rock fragments (about 3% by volume).
Layer by layer
- TopsoilAp A fine sandy loam layer about 0 to 8 in down: about 14% clay, low plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtbest layer A sandy clay loam layer about 8 to 42 in down: about 27% clay, moderate plasticity when wet, reddish brown when moist. Possible
- Loamy layerBC A sandy clay loam layer about 42 to 50 in down: about 24% clay, moderate plasticity when wet, strong brown when moist. Possible
- Sandy layerC A sandy loam layer about 50 to 80 in down: about 17% clay, moderate plasticity when wet, strong brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt), 8 to 42 in down in the typical profile: reddish brown (5YR 4/4); friable. Raw colour is not fired colour.
About the soil
- Parent material: old loamy alluvium derived from igneous and metamorphic rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 21 map units in Georgia, North Carolina, Virginia, in these survey areas: Cherokee, Gilmer, and Pickens Counties, Georgia; Davidson County, North Carolina; Douglas County, Georgia; Forsyth County, North Carolina; Fulton County, Georgia; Spotsylvania County, Virginia; Stafford and King George Counties, Virginia.
By state: wild clay in Georgia,wild clay in North Carolina,wild clay in Virginia.
USDA, distribution and extent: Distribution: North Carolina, Virginia, Alabama, Georgia, and South Carolina. Extent: Moderate
USDA, geographic setting: Landscape: Piedmont and Coastal Plain stream terraces and marine terraces in the Lower Coastal Plain
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Cecil: Strong lead
- Madison: Strong lead
- Enon: Strong lead
- Hiwassee: Strong lead
- Mecklenburg: Strong lead
- Pacolet: Strong lead
- Casville: Strong lead
See it on the map
Open a Wickham spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Wickham fine sandy loam, 2 to 8 percent slopes, map unit WkB in Davidson County, North Carolina.
- Official Series Description: Wickham(revised 11/2025), established.
- Taxonomic class: Fine-loamy, mixed, semiactive, thermic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.