Waukena soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 11 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Waukena soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Waukena spot on the map
Rated from the USDA soil survey record for Waukena fine sandy loam, saline-alkali (Western Riverside Area, California) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 25% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (12.5).
- Note Thick enough to investigate (about 49 in (124 cm)).
- Note Typically starts within about 11 in (28 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 8% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Sandy layerH1 A fine sandy loam layer about 0 to 11 in down: about 12% clay, low plasticity when wet, gray when moist. Weak indication
- Loamy layerH2best layer A sandy clay loam layer about 11 to 60 in down: about 25% clay, moderate plasticity when wet, light yellowish brown when moist. Possible
What it looks like raw
The loamy layer (H2), 11 to 60 in down in the typical profile. Raw colour is not fired colour.
About the soil
- Parent material: alluvium derived from granite.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in California, in these survey areas: Western Riverside Area, California.
By state: wild clay in California.
USDA, distribution and extent: Central San Joaquin Valley and intermountain valleys of southern California. The soils are moderately extensive in MLRA 17.
USDA, geographic setting: The Waukena soils occur on nearly level basin-like areas in valley plains with slightly irregular or hummocky surface. They occur at elevations of less than 600 feet, in a semiarid, mesothermal climate with mean annual rainfall of 8 to 12 inches, with hot, dry summers and cool, moist winters. Mean annual temperature is about 60 degrees to 63 degrees F., average January temperature 45 degrees F., and average July temperature about 82 degrees F. Frost-free season averages about 250 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Altamont: Strong lead
- Auld: Strong lead
- Bosanko: Strong lead
- Las Posas: Strong lead
- Madera: Strong lead
- Murrieta: Strong lead
- Placentia: Strong lead
- Porterville: Strong lead
See it on the map
Open a Waukena spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Waukena fine sandy loam, saline-alkali, map unit Wb in Western Riverside Area, California.
- Official Series Description: Waukena, established.
- Taxonomic class: Fine-loamy, mixed, superactive, thermic Typic Natrixeralfs
- Rated with rule version 2026-09-28.1; the method is on the About page.