Traver soil
Wild-clay potential
Weak indication
Weak indication: no layer of Traver shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Traver soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Traver loamy fine sand, eroded (Western Riverside Area, California) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 15% clay.
- Lowers the potential Low engineering plasticity index (5): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 25 in (64 cm)).
- Note Typically starts within about 13 in (33 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A loamy fine sand layer about 0 to 13 in down: about 8% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerH2best layer A fine sandy loam layer about 13 to 38 in down: about 15% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerH3 A stratified fine sandy loam to silty clay loam layer about 38 to 60 in down: about 15% clay, low plasticity when wet. Weak indication
What it looks like raw
The sandy layer (H2), 13 to 38 in down in the typical profile: light brownish gray (10YR 6/2), grayish brown (10YR 5/2) moist. Raw colour is not fired colour.
About the soil
- Parent material: alluvium derived from granite.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in California, in these survey areas: Western Riverside Area, California.
By state: wild clay in California.
USDA, distribution and extent: Central San Joaquin Valley and intermountain valleys in southern California. The soils are moderately extensive.
USDA, geographic setting: The Traver soils occur on nearly level to depressional slightly hummocky areas on alluvial fans and flood plains composed of alluvium from granitic bedrock. They occur at elevations of less than 1,700 feet, in a semiarid mesothermal climate with mean annual rainfall of 6 to 12 inches, with hot, dry summers and cool, moist winters. Mean annual temperature is about 63 degrees F., average January temperature about 45 degrees F., and average July temperature about 80 degrees F. Frost-free season averages about 220 to 260 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Altamont: Strong lead
- Auld: Strong lead
- Bosanko: Strong lead
- Las Posas: Strong lead
- Madera: Strong lead
- Murrieta: Strong lead
- Placentia: Strong lead
- Porterville: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Traver loamy fine sand, eroded, map unit Tp2 in Western Riverside Area, California.
- Official Series Description: Traver(revised 01/2003), established.
- Taxonomic class: Coarse-loamy, mixed, superactive, thermic Natric Haploxeralfs
- Rated with rule version 2026-09-28.1; the method is on the About page.