Spriggs soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 8 to 18 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Spriggs soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Spriggs spot on the map
Rated from the USDA soil survey record for Spriggs silt loam, 15 to 25 percent slopes (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (16).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Moderate thickness (about 10 in (26 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Note Few rock fragments (about 11% by volume).
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 8 in down: about 19% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Loamy layerH2best layer A clay loam layer about 8 to 18 in down: about 28% clay, moderate plasticity when wet, strong brown when moist. Promising
- Loamy layerH3 A gravelly loam layer about 18 to 32 in down: about 21% clay, moderate plasticity when wet, yellowish red when moist. Weak indication
- BedrockH4 Bedrock about 32 to 48 in down: no clay layer to dig. Weak indication
- BedrockH5 Bedrock about 48 to 58 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (H2), 8 to 18 in down in the typical profile: strong brown (7.5YR 5/8); firm, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: Mixed mafic residuum.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 48 in (122 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Virginia, in these survey areas: Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Distribution: Virginia, Maryland, and North Carolina
USDA, geographic setting: Landscape: Piedmont upland
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aden: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
- Calverton: Strong lead
- Caroline: Strong lead
- Cecil: Strong lead
See it on the map
Open a Spriggs spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Spriggs silt loam, 15 to 25 percent slopes, map unit 50D in Prince William County, Virginia.
- Official Series Description: Spriggs(revised 05/2003), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Ultic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.