Quantico soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 18 to 47 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Quantico soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Quantico spot on the map
Rated from the USDA soil survey record for Quantico sandy loam, 2 to 7 percent slopes (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 48% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (21): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 29 in (73 cm)).
- Note Typically starts within about 18 in (46 cm) of the surface.
- Note Few rock fragments (about 7% by volume).
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- Loamy layerH1 A loam layer about 0 to 13 in down: about 19% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- Clay-rich layerH2 A clay loam layer about 13 to 18 in down: about 35% clay, moderate plasticity when wet, strong brown when moist. Promising
- Clay-rich layerH3best layer A clay layer about 18 to 47 in down: about 48% clay, high plasticity when wet, strong brown when moist. Strong lead
- Clay-rich layerH4 A sandy clay layer about 47 to 72 in down: about 35% clay, moderate plasticity when wet, strong brown when moist. Promising
What it looks like raw
The clay-rich layer (H3), 18 to 47 in down in the typical profile: strong brown (7.5YR 5/8); firm, plastic, sticky. Raw colour is not fired colour.
About the soil
- Parent material: marine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: clayey.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Virginia, in these survey areas: Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Northern Virginia and Maryland. Moderate extent in Prince William County, 8000 acres.
USDA, geographic setting: Quantico soils are on medium to broad drainage divides of the older coastal plain terraces. Elevations generally range from about 150 to 350 feet. Slope gradients range from 0 to 25 percent. These soils developed in stratified fluvio-marine sediments that have a high content of feldspathic sands. Mean annual precipitation ranges from 35 to 45 inches and mean annual temperature ranges from 50 to 57 degrees F.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aden: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
- Calverton: Strong lead
- Caroline: Strong lead
- Cecil: Strong lead
See it on the map
Open a Quantico spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 75%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Quantico sandy loam, 2 to 7 percent slopes, map unit 47B in Prince William County, Virginia.
- Official Series Description: Quantico(revised 03/2022), established.
- Taxonomic class: Fine, mixed, semiactive, mesic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.