Oakboro soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 10 to 46 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Oakboro soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Oakboro spot on the map
Rated from the USDA soil survey record for Oakboro silt loam, 0 to 2 percent slopes, frequently flooded (Davidson County, North Carolina) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (7.5).
- Note Thick enough to investigate (about 36 in (92 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Note Few rock fragments (about 10% by volume).
Layer by layer
- TopsoilA A silt loam layer about 0 to 10 in down: about 19% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Loamy layerBwbest layer A silty clay loam layer about 10 to 46 in down: about 30% clay, moderate plasticity when wet, brownish yellow when moist. Promising
- BedrockR Unweathered bedrock about 46 to 80 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (Bw), 10 to 46 in down in the typical profile: brownish yellow (10YR 6/6); friable. Raw colour is not fired colour.
About the soil
- Parent material: loamy alluvium derived from igneous and metamorphic rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
- Lithic bedrock typically about 46 in (117 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in North Carolina, in these survey areas: Davidson County, North Carolina.
By state: wild clay in North Carolina.
USDA, distribution and extent: The Carolina Slate Belt section of the Piedmont area in North Carolina and possibly South Carolina and Virginia. The series is of small extent.
USDA, geographic setting: Oakboro soils are nearly level and are on narrow flood plains along perennial and intermittent streams that drain from the Carolina Slate Belt of the Piedmont. Slopes range from 0 to 2 percent. The soil formed in loamy alluvium washed largely from soils formed in residuum from slates, siltstones, sandstones, and tuffs. The mean annual temperature is about 60 degrees F., and the average annual rainfall is 47 inches near the type location.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Armenia: Strong lead
- Badin: Strong lead
- Casville: Strong lead
- Cecil: Strong lead
- Clifford: Strong lead
- Davidson: Strong lead
- Davie: Strong lead
See it on the map
Open a Oakboro spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Oakboro silt loam, 0 to 2 percent slopes, frequently flooded, map unit OkA in Davidson County, North Carolina.
- Official Series Description: Oakboro(revised 10/2021), established.
- Taxonomic class: Fine-loamy, mixed, active, thermic Fluvaquentic Dystrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.