Minnieville soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 8 to 48 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Minnieville soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Minnieville spot on the map
Rated from the USDA soil survey record for Minnieville clay loam, 2 to 7 percent slopes, severely eroded (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 53% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (10).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 40 in (102 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Note Few rock fragments (about 7% by volume).
Layer by layer
- Loamy layerH1 A clay loam layer about 0 to 8 in down: about 34% clay, low plasticity when wet, brown when moist. Possible
- Clay-rich layerH2best layer A clay layer about 8 to 48 in down: about 53% clay, moderate plasticity when wet, red when moist. Strong lead
- Clay-rich layerH3 A clay loam layer about 48 to 80 in down: about 35% clay, low plasticity when wet, red when moist. Possible
What it looks like raw
The clay-rich layer (H2), 8 to 48 in down in the typical profile: red (2.5YR 4/6); firm, plastic, sticky. Raw colour is not fired colour.
About the soil
- Parent material: Mixed mafic residuum.
- USDA family mineralogy: kaolinitic. Kaolinite-dominated clays are typically less plastic than smectitic clays.
- USDA family particle-size class: fine.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Virginia, in these survey areas: Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Northern Virginia and Maryland. The series is of small extent.
USDA, geographic setting: Minnieville soils are on ridges and sideslopes of the northern part of the Piedmont Plateau. Slope gradients range from 2 to 25 percent. These soils developed in residuum from hornblende gneiss or hornblende schist and other mixed basic and acidic volcanogenic materials. Annual temperature ranges from about 53 to 57 degrees F. Annual precipitation ranges from about 39 to 43 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aden: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
- Calverton: Strong lead
- Caroline: Strong lead
- Cecil: Strong lead
See it on the map
Open a Minnieville spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Minnieville clay loam, 2 to 7 percent slopes, severely eroded, map unit 39B3 in Prince William County, Virginia.
- Official Series Description: Minnieville(revised 09/2021), established.
- Taxonomic class: Fine, kaolinitic, mesic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.