Margo soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 9 to 42 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Margo soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Margo loam, 2 to 7 percent slopes (Spotsylvania County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (12).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 33 in (84 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Note Few rock fragments (about 1% by volume).
Layer by layer
- Sandy layerH1 A loam layer about 0 to 9 in down: about 16% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- Loamy layerH2best layer A clay loam layer about 9 to 42 in down: about 30% clay, moderate plasticity when wet, light olive brown when moist. Promising
- Loamy layerH3 A gravelly clay loam layer about 42 to 45 in down: about 30% clay, moderate plasticity when wet, light olive brown when moist. Weak indication
- Loamy layerH4 A sandy loam layer about 45 to 60 in down: about 18% clay, low plasticity when wet, brownish yellow when moist. Weak indication
What it looks like raw
The loamy layer (H2), 9 to 42 in down in the typical profile: light olive brown (2.5Y 5/6), many fine and medium distinct light brownish gray (10YR6/2); friable, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from mica schist.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Virginia, in these survey areas: Spotsylvania County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Margo soils are not extensive. This series is thought to occur on the southern Piedmont Province of Virginia and North Carolina.
USDA, geographic setting: Margo soils are dominantly in depressions, along drainageways, and on toe slopes in the Piedmont Province. They also occur on terraces in the Coastal Plain in sediments washed from the Piedmont. Slopes are commonly concave and range in gradient from 0 to 7 percent. These soils formed in alluvial and colluvial material underlain by weathered mica schist or Coastal Plain sediments at depth of 50 to 130 cm.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Brockroad: Strong lead
- Catharpin: Strong lead
- Cecil: Strong lead
- Cullen: Strong lead
- Dogue: Strong lead
- Fluvanna: Strong lead
- Masada: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Margo loam, 2 to 7 percent slopes, map unit 28B in Spotsylvania County, Virginia.
- Official Series Description: Margo(revised 10/2021), established.
- Taxonomic class: Fine-silty, mixed, semiactive, thermic Aquic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.