Manassas soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 10 to 43 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Manassas soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Manassas spot on the map
Rated from the USDA soil survey record for Manassas silt loam, 2 to 7 percent slopes (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 26% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (16).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 33 in (84 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Note Few rock fragments (about 3% by volume).
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 10 in down: about 19% clay, moderate plasticity when wet, dark reddish brown when moist. Possible
- Loamy layerH2best layer A silt loam layer about 10 to 43 in down: about 26% clay, moderate plasticity when wet, reddish brown when moist. Possible
- Loamy layerH3 A channery sandy loam layer about 43 to 49 in down: about 19% clay, moderate plasticity when wet, reddish brown when moist. Weak indication
- BedrockH4 Bedrock about 49 to 60 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (H2), 10 to 43 in down in the typical profile: reddish brown (5YR 4/4); friable; slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: Triassic residuum.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
- Paralithic bedrock typically about 49 in (124 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Virginia, in these survey areas: Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Virginia, Maryland, Pennsylvania and New Jersey; also possibly in North Carolina. The series is of moderate extent.
USDA, geographic setting: Manassas soils are on footslopes, colluvial fans, along drainageways, and in narrow saddles of the Triassic lowlands in the Piedmont Province. Slopes range from 0 to 7 percent. The soils developed in colluvial and residual materials derived from dominantly shale, siltstone, and conglomerate. Mean annual temperature ranges from 52 degrees to 59 degrees F. Mean annual precipitation ranges from about 36 to 44 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aden: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
- Calverton: Strong lead
- Caroline: Strong lead
- Cecil: Strong lead
See it on the map
Open a Manassas spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Manassas silt loam, 2 to 7 percent slopes, map unit 35B in Prince William County, Virginia.
- Official Series Description: Manassas(revised 08/2013), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Ultic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.