Louisburg soil
Wild-clay potential
Weak indication
Weak indication: no layer of Louisburg shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Louisburg soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Louisburg spot on the map
Rated from the USDA soil survey record for Louisburg sandy loam, 7 to 15 percent slopes (Spotsylvania County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 13% clay.
- Lowers the potential Low engineering plasticity index (3): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 16 in (40 cm)).
- Note Typically starts within about 11 in (28 cm) of the surface.
- Note Few rock fragments (about 10% by volume).
Layer by layer
- Sandy layerH1 A sandy loam layer about 0 to 11 in down: about 10% clay, low plasticity when wet, dark brown when moist. Weak indication
- Sandy layerH2best layer A sandy loam layer about 11 to 27 in down: about 13% clay, low plasticity when wet, brown when moist. Weak indication
- BedrockH3 Bedrock about 27 to 36 in down: no clay layer to dig. Weak indication
What it looks like raw
The sandy layer (H2), 11 to 27 in down in the typical profile: brown (7.5YR 4/4); friable. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from granite and gneiss.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 27 in (68 cm) down.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Georgia, Virginia, in these survey areas: Douglas County, Georgia; Spotsylvania County, Virginia.
By state: wild clay in Georgia,wild clay in Virginia.
USDA, distribution and extent: Distribution: Georgia, Alabama, South Carolina, North Carolina, and Virginia. Extent: Low
USDA, geographic setting: Landscape: Piedmont upland
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Brockroad: Strong lead
- Catharpin: Strong lead
- Cecil: Strong lead
- Cullen: Strong lead
- Davidson: Strong lead
- Dogue: Strong lead
- Fluvanna: Strong lead
See it on the map
Open a Louisburg spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 75%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Louisburg sandy loam, 7 to 15 percent slopes, map unit 27C in Spotsylvania County, Virginia.
- Official Series Description: Louisburg(revised 09/2025), established.
- Taxonomic class: Coarse-loamy, mixed, semiactive, thermic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.