LaRoque soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 7 to 14 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about LaRoque soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a LaRoque spot on the map
Rated from the USDA soil survey record for LaRoque loam, 7 to 15 percent slopes (Spotsylvania County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (7).
- Note The official series description calls the wet soil slightly plastic.
- Note Moderate thickness (about 7 in (18 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 3% by volume).
Layer by layer
- Sandy layerH1 A loam layer about 0 to 7 in down: about 16% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- Loamy layerH2best layer A loam layer about 7 to 14 in down: about 20% clay, moderate plasticity when wet, reddish yellow when moist. Possible
- Sandy layerH3 A loam layer about 14 to 34 in down: about 16% clay, low plasticity when wet, yellowish brown when moist. Weak indication
- BedrockH4 Bedrock about 34 to 60 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (H2), 7 to 14 in down in the typical profile: reddish yellow (7.5YR 6/6); friable, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from mica schist.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 34 in (86 cm) down.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Virginia, in these survey areas: Spotsylvania County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: The LaRoque soils are not extensive. They are thought to occur in the Southern Piedmont Province of Virginia and North Carolina.
USDA, geographic setting: LaRoque soils are on uplands in Piedmont Plateau. They formed in materials weathered from sericite schist. The slope gradient commonly is 15 to 55 percent, but range is 0 to 55 percent.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Brockroad: Strong lead
- Catharpin: Strong lead
- Cecil: Strong lead
- Cullen: Strong lead
- Dogue: Strong lead
- Fluvanna: Strong lead
- Masada: Strong lead
See it on the map
Open a LaRoque spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 75%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for LaRoque loam, 7 to 15 percent slopes, map unit 26C in Spotsylvania County, Virginia.
- Official Series Description: LaRoque(revised 10/2021), established.
- Taxonomic class: Fine-loamy, mixed, semiactive, thermic Inceptic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.