Friant soil
Wild-clay potential
Weak indication
Weak indication: no layer of Friant shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Friant soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Friant fine sandy loam, 5 to 25 percent slopes, eroded (Western Riverside Area, California) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 14% clay.
- Lowers the potential Low engineering plasticity index (5): little plastic behavior expected when wet.
- Lowers the potential The official series description calls the wet soil nonsticky and nonplastic.
- Note Thick enough to investigate (about 13 in (33 cm)).
- Note Typically starts within about 0 in (0 cm) of the surface.
- Note Few rock fragments (about 11% by volume).
Layer by layer
- Sandy layerH1best layer A fine sandy loam layer about 0 to 13 in down: about 14% clay, low plasticity when wet, brown when moist. Weak indication
- BedrockH2 Unweathered bedrock about 13 to 17 in down: no clay layer to dig. Weak indication
What it looks like raw
The sandy layer (H1), 0 to 13 in down in the typical profile: brown (10YR 5/3), fine sandy loam dark brown (10YR 3/3) moist; slightly hard, friable, nonsticky and nonplastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from schist, mica.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
- Lithic bedrock typically about 13 in (33 cm) down.
Where it is mapped
Seen on the map as the most common soil in 3 map units in California, in these survey areas: Western Riverside Area, California.
By state: wild clay in California.
USDA, distribution and extent: Foothills along the east side of the San Joquin Valley and the southwestern part of southern California. The soils are moderately extensive.
USDA, geographic setting: Friant soils are on hilly and mountainous landscapes at elevations of 500 to 3,500 feet. Slopes range from 9 to 75 percent. The soils formed in residuum weathered from mica schist, quartz schist, and gneiss. The climate is subhumid mesothermal with warm, dry summers and cool, moist winters. The mean annual precipitation is 12 to 25 inches. The mean annual temperature is about 59 to 65 degrees F.; the average January temperature is 42 to 54 degrees F.; the average July temperature is about 72 to 78 degrees F. The frost free season is about 210 to 330 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Altamont: Strong lead
- Auld: Strong lead
- Bosanko: Strong lead
- Las Posas: Strong lead
- Madera: Strong lead
- Murrieta: Strong lead
- Placentia: Strong lead
- Porterville: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Friant fine sandy loam, 5 to 25 percent slopes, eroded, map unit FwE2 in Western Riverside Area, California.
- Official Series Description: Friant(revised 05/2001), established.
- Taxonomic class: Loamy, mixed, superactive, thermic Lithic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.