Dumfries soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 10 to 29 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Dumfries soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Dumfries spot on the map
Rated from the USDA soil survey record for Dumfries sandy loam, 7 to 15 percent slopes (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 27% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (11).
- Note Thick enough to investigate (about 19 in (49 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Note Few rock fragments (about 6% by volume).
Layer by layer
- Sandy layerH1 A sandy loam layer about 0 to 10 in down: about 13% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
- Loamy layerH2best layer A sandy clay loam layer about 10 to 29 in down: about 27% clay, moderate plasticity when wet, brownish yellow when moist. Possible
- Sandy layerH3 A sandy loam layer about 29 to 35 in down: about 15% clay, low plasticity when wet, yellowish brown when moist. Weak indication
- Sandy layerH4 A sandy loam layer about 35 to 72 in down: about 13% clay, low plasticity when wet, very pale brown when moist. Weak indication
What it looks like raw
The loamy layer (H2), 10 to 29 in down in the typical profile: brownish yellow (10YR 6/8); friable. Raw colour is not fired colour.
About the soil
- Parent material: marine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Virginia, in these survey areas: Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Northern Virginia, and Maryland. Moderate extent; about 6,800 acres are in Prince William County. Comparable amounts are in Farifax and Stafford Counties.
USDA, geographic setting: Dumfries soils are on narrow ridges and side slopes in the northern part of the Atlantic Coastal Plain. These soils developed in sandy feldspathic sediments in highly dissected Coastal Plain terraces. Slope ranges from 2 to 55 percent. Mean annual precipitation ranges from 35 to 42 inches and mean annual temperature ranges from 50 to 59 degrees F.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aden: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
- Calverton: Strong lead
- Caroline: Strong lead
- Cecil: Strong lead
See it on the map
Open a Dumfries spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 75%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Dumfries sandy loam, 7 to 15 percent slopes, map unit 18C in Prince William County, Virginia.
- Official Series Description: Dumfries(revised 09/2021), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Ultic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.