Domino soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 14 to 27 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Domino soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Domino fine sandy loam, eroded (Western Riverside Area, California) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (15).
- Note The official series description calls the wet soil moderately sticky and slightly plastic.
- Note Thick enough to investigate (about 13 in (33 cm)).
- Note Typically starts within about 14 in (36 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 8% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Sandy layerH1 A fine sandy loam layer about 0 to 14 in down: about 13% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Loamy layerH2best layer A silt loam layer about 14 to 27 in down: about 28% clay, moderate plasticity when wet, light brownish gray when moist. Promising
- H3 A cemented layer about 27 to 36 in down: USDA gives no clay percentage or texture for it. Not enough data
- Sandy layerH4 A loam layer about 36 to 63 in down: about 15% clay, low plasticity when wet, pale yellow when moist. Weak indication
What it looks like raw
The loamy layer (H2), 14 to 27 in down in the typical profile: light brownish gray (2.5Y 6/2), grayish brown (2.5Y 5/2) moist; slightly hard, friable, sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium derived from granite.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 5 map units in California, in these survey areas: Western Riverside Area, California.
By state: wild clay in California.
USDA, distribution and extent: Moderately well drained; slow runoff; slow permeability.
USDA, geographic setting: The Domino soils are on nearly level basin areas and toes of alluvial fans at elevations of 1,000 to 1,800 feet. The climate is semiarid with hot dry summers and cool moist winters. The mean annual precipitation is 10 to 13 inches. Average January temperature is 49 degrees F., the average July temperature is 77 degrees F., and the mean annual temperature is 63 degrees F. The frost-free season is 230 to 280 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Altamont: Strong lead
- Auld: Strong lead
- Bosanko: Strong lead
- Las Posas: Strong lead
- Madera: Strong lead
- Murrieta: Strong lead
- Placentia: Strong lead
- Porterville: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Domino fine sandy loam, eroded, map unit Ds2 in Western Riverside Area, California.
- Official Series Description: Domino(revised 03/2001), established.
- Taxonomic class: Fine-loamy, mixed, superactive, thermic Xeric Petrocalcids
- Rated with rule version 2026-09-28.1; the method is on the About page.