Coyle soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 10 to 17 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Coyle soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Coyle loam, 1 to 3 percent slopes (Osage County, Oklahoma) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 29% clay in the fine-earth portion.
- Note USDA labels this a "Bt1" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Note Moderate thickness (about 7 in (17 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilA A loam layer about 0 to 10 in down: about 21% clay, moderate plasticity when wet, dark reddish gray when moist. Possible
- Clay subsoilBt1best layer A sandy clay loam layer about 10 to 17 in down: about 29% clay, high plasticity when wet, red when moist. Promising
- Clay subsoilBt2 A sandy clay loam layer about 17 to 23 in down: about 30% clay, high plasticity when wet, light red when moist. Promising
- Loamy layerBC A very gravelly sandy clay loam layer about 23 to 30 in down: about 22% clay, moderate plasticity when wet, red when moist. Weak indication
- BedrockCr Bedrock about 30 to 40 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt1), 10 to 17 in down in the typical profile: red (2.5YR 5/6), red (2.5YR 4/6) moist; hard, firm. Raw colour is not fired colour.
About the soil
- Parent material: loamy residuum weathered from sandstone.
- USDA family mineralogy: siliceous.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 30 in (76 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oklahoma, in these survey areas: Osage County, Oklahoma.
By state: wild clay in Oklahoma.
USDA, distribution and extent: North Central Oklahoma; LRR H; MLRA 80A; the series of large extent.
USDA, geographic setting: Parent material: residuum weathered from sandstone of Permian age
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Agra: Strong lead
- Bethany: Strong lead
- Grainola: Strong lead
- Niotaze: Strong lead
- Parsons: Strong lead
- Prue: Strong lead
- Steedman: Strong lead
- Wynona: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Coyle loam, 1 to 3 percent slopes, map unit 4 in Osage County, Oklahoma.
- Official Series Description: Coyle(revised 02/2016), established.
- Taxonomic class: Fine-loamy, siliceous, active, thermic Udic Argiustolls
- Rated with rule version 2026-09-28.1; the method is on the About page.