Catlett soil
Wild-clay potential
Weak indication
Weak indication: no layer of Catlett shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Catlett soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Catlett spot on the map
Rated from the USDA soil survey record for Catlett-Sycoline complex, 7 to 15 percent slopes (Prince William County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- Sandy layerH1 A gravelly silt loam layer about 0 to 6 in down: about 16% clay, moderate plasticity when wet, brown when moist. Weak indication
- Sandy layerH2 A very gravelly silt loam layer about 6 to 12 in down: about 16% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Sandy layerH3 An extremely gravelly silt loam layer about 12 to 17 in down: about 16% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- BedrockH4 Bedrock about 17 to 26 in down: no clay layer to dig. Weak indication
- BedrockH5best layer Bedrock about 26 to 36 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (H5), 26 to 36 in down in the typical profile: partially weathered light gray (10YR 7/1), and yellowish brown (10YR 5/6). Raw colour is not fired colour.
About the soil
- Parent material: Triassic residuum.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
- Lithic bedrock typically about 26 in (66 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Virginia, in these survey areas: Prince William County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Northern Virginia in the Culpeper basin of the Piedmont Plateau of Maryland and Pennsylvania. The series is of moderate extent.
USDA, geographic setting: Catlett soils are on rolling ridges and short sideslopes in the more dissected landforms of the Culpeper basin. These soils formed in residuum from Triassic and Jurassic gray brown and yellow hornfel and granulite of the Culpeper basin of the Piedmont Plateau. Slopes range from 2 to 50 percent. Mean annual temperature ranges from 53 to 57 degrees F and mean annual precipitation ranges from about 38 to 44 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aden: Strong lead
- Albano: Strong lead
- Appling: Strong lead
- Braddock: Strong lead
- Buckhall: Strong lead
- Calverton: Strong lead
- Caroline: Strong lead
- Cecil: Strong lead
See it on the map
Open a Catlett spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 41%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Catlett-Sycoline complex, 7 to 15 percent slopes, map unit 13C in Prince William County, Virginia.
- Official Series Description: Catlett(revised 01/2006), established.
- Taxonomic class: Loamy-skeletal, mixed, active, mesic, shallow Ultic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.