Abell soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 12 to 47 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Abell soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Abell sandy loam, 2 to 7 percent slopes (Spotsylvania County, Virginia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 27% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (10).
- Raises the potential The official series description calls the wet soil slightly sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 35 in (89 cm)).
- Note Typically starts within about 12 in (30 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- Sandy layerH1 A sandy loam layer about 0 to 12 in down: about 12% clay, low plasticity when wet, dark brown when moist. Weak indication
- Loamy layerH2best layer A sandy clay loam layer about 12 to 47 in down: about 27% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Loamy layerH3 A sandy clay loam layer about 47 to 62 in down: about 30% clay, moderate plasticity when wet, multicolored gray when moist. Possible
- Loamy layerH4 A sandy loam layer about 62 to 75 in down: about 19% clay, low plasticity when wet. Weak indication
What it looks like raw
The loamy layer (H2), 12 to 47 in down in the typical profile: yellowish brown (10YR 5/6); friable, slightly sticky, plastic. Raw colour is not fired colour.
About the soil
- Parent material: local alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Virginia, in these survey areas: Spotsylvania County, Virginia.
By state: wild clay in Virginia.
USDA, distribution and extent: Virginia and possibly North Carolina. The series is of moderate extent.
USDA, geographic setting: Abell soils are nearly level to gently sloping in upland depressions, footslopes and along intermittent drainageways in the Piedmont. Slopes range from 0 to 7 percent. These soils formed in materials that have washed from associated soils on adjacent landscapes and in the underlying residuum. The mean annual temperature ranges from 59 to 68 degrees F, and the mean annual precipitation ranges from 40 to 46 inches.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Brockroad: Strong lead
- Catharpin: Strong lead
- Cecil: Strong lead
- Cullen: Strong lead
- Dogue: Strong lead
- Fluvanna: Strong lead
- Masada: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Abell sandy loam, 2 to 7 percent slopes, map unit 1B in Spotsylvania County, Virginia.
- Official Series Description: Abell(revised 09/2002), established.
- Taxonomic class: Fine-loamy, mixed, semiactive, thermic Aquic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.