Sunday soil
Wild-clay potential
Weak indication
Weak indication: no layer of Sunday shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Sunday soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Sunday loamy fine sand, 0 to 3 percent slopes, occasionally flooded (Coos County Area, New Hampshire) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 1% clay.
- Lowers the potential Low engineering plasticity index (0): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 56 in (142 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Note Few rock fragments (about 7% by volume).
Layer by layer
- Sandy layerH1 A loamy fine sand layer about 0 to 9 in down: about 3% clay, low plasticity when wet, light olive brown when moist. Weak indication
- Sandy layerH2best layer A stratified loamy fine sand layer about 9 to 65 in down: about 1% clay, low plasticity when wet, light olive brown when moist. Weak indication
What it looks like raw
The sandy layer (H2), 9 to 65 in down in the typical profile: light olive brown (2.5Y 5/4); loose. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: not used.
- Drainage: excessively drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Maine, New Hampshire, in these survey areas: Coos County Area, New Hampshire; Franklin County Area and Part of Somerset County, Maine.
By state: wild clay in Maine,wild clay in New Hampshire.
USDA, distribution and extent: Maine, New Hampshire, and Vermont; MLRAs 143 and 144B. The series is of moderate extent.
USDA, geographic setting: Sunday soils are nearly level soils on flood plains adjacent to rivers and stream channels. Slope is generally less than 3 percent. The soils formed in recent sandy alluvial deposits derived principally from gneiss, schist, granite, and quartzite rocks. Frequency of flooding varies from once or twice a year to once in 10 years and generally occurs during spring runoff or during heavy rains in the fall. The climate is humid and cool temperate. The mean annual precipitation ranges from 34 to 48 inches. The mean annual temperature ranges from about 38 to 46 degrees F. The frost-free season ranges from 80 to 160 days. Elevation ranges from 10 to 1750 feet above sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Swanville: Possible
- Adams: Weak indication
- Bucksport: Weak indication
- Colton: Weak indication
- Croghan: Weak indication
- Fryeburg: Weak indication
- Lovewell: Weak indication
- Lyman: Weak indication
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Sunday loamy fine sand, 0 to 3 percent slopes, occasionally flooded, map unit 102A in Coos County Area, New Hampshire.
- Official Series Description: Sunday(revised 05/1999), established.
- Taxonomic class: Mixed, frigid Typic Udipsamments
- Rated with rule version 2026-09-28.1; the method is on the About page.