Manvel soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 6 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Manvel soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Manvel loam (Boulder County Area, Colorado) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 27% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (12.5).
- Note Thick enough to investigate (about 54 in (137 cm)).
- Note Typically starts within about 6 in (15 cm) of the surface.
- Note Few rock fragments (about 2% by volume).
- Note USDA reports about 28% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Loamy layerH1 A loam layer about 0 to 6 in down: about 21% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerH2best layer A silt loam layer about 6 to 60 in down: about 27% clay, moderate plasticity when wet, pale brown when moist. Possible
What it looks like raw
The loamy layer (H2), 6 to 60 in down in the typical profile. Raw colour is not fired colour.
About the soil
- Parent material: calcareous loamy alluvium.
- USDA family particle-size class: fine-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Colorado, in these survey areas: Boulder County Area, Colorado.
By state: wild clay in Colorado.
USDA, distribution and extent: Southern and central Colorado, parts of Kansas, Nebraska and South Dakota, LRR G, MLRA 69, 72, 60A and 64. The series is extensive.
USDA, geographic setting: Landform: fans and plains, interfluves
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Denver: Strong lead
- Englewood: Strong lead
- Gaynor: Strong lead
- Heldt: Strong lead
- Kutch: Strong lead
- Longmont: Strong lead
- Nunn: Strong lead
- Renohill: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Manvel loam, map unit Me in Boulder County Area, Colorado.
- Official Series Description: Manvel(revised 03/2013), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Ustic Haplocalcids
- Rated with rule version 2026-09-28.1; the method is on the About page.