Hargreave soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 6 to 13 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Hargreave soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Hargreave spot on the map
Rated from the USDA soil survey record for Hargreave fine sandy loam, 3 to 9 percent slopes (Boulder County Area, Colorado) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 27% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (10).
- Note Moderate thickness (about 7 in (18 cm)).
- Note Typically starts within about 6 in (15 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A fine sandy loam layer about 0 to 6 in down: about 15% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Loamy layerH2best layer A sandy clay loam layer about 6 to 13 in down: about 27% clay, moderate plasticity when wet, brown when moist. Promising
- Sandy layerH3 A fine sandy loam layer about 13 to 27 in down: about 15% clay, moderate plasticity when wet, brown when moist. Weak indication
- BedrockH4 Weathered bedrock about 27 to 31 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (H2), 6 to 13 in down in the typical profile: brown (10YR 5/3), dark brown (10YR 3/3) moist; slightly hard, very friable. Raw colour is not fired colour.
About the soil
- Parent material: loamy residuum weathered from sandstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 27 in (69 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Colorado, in these survey areas: Boulder County Area, Colorado.
By state: wild clay in Colorado.
USDA, distribution and extent: Wyoming, Colorado, and eastern Nebraska. The series is of moderate extent.
USDA, geographic setting: Hargreave soils are on nearly level to moderately sloping uplands. Slopes typically range from 0 to about 15 percent. These soils formed in noncalcareous materials weathered residually from soft, noncalcareous sandstone. Elevations are 3,500 to 5,500 feet. The mean annual precipitation is 12 to 19 inches with peak periods of precipitation in the spring and early summer. Mean annual temperature is 50 degrees F. Frost-free season ranges from 105 to 130 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Denver: Strong lead
- Englewood: Strong lead
- Gaynor: Strong lead
- Heldt: Strong lead
- Kutch: Strong lead
- Longmont: Strong lead
- Nunn: Strong lead
- Renohill: Strong lead
See it on the map
Open a Hargreave spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Hargreave fine sandy loam, 3 to 9 percent slopes, map unit HaD in Boulder County Area, Colorado.
- Official Series Description: Hargreave(revised 11/2004), established.
- Taxonomic class: Fine-loamy, mixed, superactive, mesic Aridic Argiustolls
- Rated with rule version 2026-09-28.1; the method is on the About page.